HAMMERHEAD
$9,900.00
Price
The Lane Shark Hammerhead is the only patented, hydraulically articulated, multi-position brush cutter for tractors with a minimum weight of 3,000lbs and a hydraulic flow range of 8.5-20gpm. Supported by a cutting diameter of 44”, the Hammerhead can tackle overgrown vegetation and cut the time spent on brush clearing jobs by more than half, and a wide range of cutting positions makes sure you get the job done right.
We are a tractor attachment manufacturer that’s committed to meeting the diverse needs of the agricultural and landscaping community with precision-engineered products. Use the Lane Shark Hammerhead brush cutter to clear overgrown vegetation, manage thick brambles and saplings, and cut through dense underbrush efficiently. Its wide hydraulic flow range ensures efficient performance and power management, making the tractor brush cutter effective in tackling different tasks with precision and ease. Its cutting positions, which are vertical and offset from 25 to 55 degrees, enable it to easily maneuver around obstacles and reach difficult areas. Buy the Lane Shark Hammerhead brush cutter to simplify land management.
HAMMERHEAD COMPATIBILITY:
- Hydraulic implement flow rate 8.5gpm to 20gpm
- Must have a third function to operate. Must have a WR Long C-Flow component OR return direct to sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
- NOT COMPATIBLE WITH DIVERTER VALVES
- Minimum dry tractor weight of 3000 lbs
- Minimum tractor width of 55 inches
- Must have certified roll over protection system
- For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.
HAMMERHEAD DETAILS:
- Hammerhead control switch box included
- Cutting width / cutting area of 44″
- Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44″. The Hammerhead has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
- The Lane Shark Hammerhead attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
- Rear rubber skirt and skid shoes for a smoother cutting process
- The Lane Shark Hammerhead weighs just under 550 pounds
- When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
- NOT COMPATIBLE WITH SKID STEERS
